Orix L5 24V/12V Constant Voltage Power Supply

100W 24V/12 V Power Supply Overview

The Orix L5 100W 24V/12V Power Supply is a slim constant-voltage power supply designed for professional LED lighting applications. It converts AC mains power into stable 24V/12V DC output, making it suitable for LED strips, linear lighting, aluminum LED profiles, cabinet lighting, decorative lighting, and other compatible 24V/12V systems.

Its narrow metal housing makes installation easier in projects where space is limited. Moreover, the ventilated enclosure supports natural heat dissipation during operation.

The compact format makes this model particularly useful for architectural lighting installations inside ceiling voids, electrical cabinets, joinery, display units, and other accessible service areas.

Slim Constant Voltage Design

The slim body allows contractors to install the power supply in locations where conventional wide power supplies may not fit easily.

At the same time, the ventilated metal enclosure allows heat generated by the internal electronic components to escape more effectively.

Therefore, this power supply works well in professional installations that require both compact dimensions and dependable 24V/12V DC power.

Typical applications include:

• LED strip lighting
• Linear LED profiles
• Cove lighting
• Ceiling lighting
• Cabinet lighting
• Display lighting
• Signage
• Retail lighting
• Decorative lighting
• Residential LED systems
• Hospitality projects

24V/12V Power Supply for LED Lighting

The 24V/12V Power Supply is intended for constant-voltage LED products that operate at 24V DC/12V.

For example, designers can use it with architectural LED strips installed inside aluminum profiles. In addition, contractors can use one power supply for several smaller lighting sections when the combined electrical load remains within the permitted capacity.

However, installers should always calculate the total connected wattage before selecting the power supply.

Recommended Loading

For reliable LED installations, it is good practice to avoid operating a power supply continuously at its absolute maximum rating.

For example, when using a 100W unit, designers may leave reasonable spare capacity according to the project requirements, operating environment, LED load, and manufacturer recommendations.

This approach can provide additional thermal margin and accommodate small variations in the actual LED system load.

Suitable for Linear Lighting Systems

The Orix L5 series works particularly well with linear architectural lighting.

Designers can combine the unit with:

• Recessed LED profiles
• Surface-mounted profiles
• Cove profiles
• Ceiling LED channels
• Skirting lighting
• Cabinet profiles
• Decorative linear lighting

As a result, the power supply can form part of a complete ORIX architectural lighting system.

Explore more ORIX architectural lighting solutions.

Compact Metal Housing

The metal body protects the internal electronics while its ventilation openings support heat management.

Furthermore, the narrow housing can simplify installation inside confined service areas.

Installers should still provide sufficient airflow around the unit. They should not completely enclose the power supply inside an unventilated space unless the installation method specifically allows it.

Input and Output Connections

The terminal arrangement provides clear separation between the AC input and DC output connections.

During installation, electricians should verify:

• AC input wiring
• Line and neutral connections
• Protective earth where required
• 24V/12V positive output
• 24V/12V negative output
• Correct cable size
• Connected LED load

Correct polarity is especially important on the DC side because LED products require the correct positive and negative connection.

LED Strip Load Calculation

Before connecting LED strips, calculate the total wattage.

For example, if an LED strip consumes 10W per meter, a 7-meter installation requires approximately:

10W × 7m = 70W

Therefore, the load remains below the nominal 100W capacity.

The exact design margin should follow the selected LED strip specification, installation environment, and project requirements.

Installation Considerations

The Orix L5 24V/12V Power Supply should remain accessible after installation.

Installers should consider:

• Ventilation
• Driver accessibility
• Ambient temperature
• Cable length
• Cable cross-section
• Voltage drop
• Total LED load
• Electrical protection
• Installation location

In addition, longer 24V/12V cable runs may require larger cable sizes to minimize voltage drop.

Residential and Hospitality Applications

The compact format makes this power supply useful in villas, apartments, hotels, restaurants, and other interior projects.

For instance, designers can use it for concealed cove lighting in bedrooms or living rooms. Similarly, hospitality projects can use the unit for linear lighting behind joinery, wall panels, mirrors, counters, and decorative ceiling details.

Retail and Commercial Applications

Retail and commercial projects often use extensive linear LED systems.

This power supply can support applications such as:

• Display shelves
• Retail joinery
• Product displays
• Reception desks
• Illuminated signage
• Linear ceiling lighting
• Decorative wall details

Consequently, contractors can integrate the power supply into many architectural lighting layouts.

Electrical Safety and Specification

Electricians should install the product according to the project electrical design and applicable local regulations.

Before final selection, confirm the exact:

• Input voltage range
• Rated output power
• Output voltage
• Output current
• Protection functions
• Operating temperature
• Product dimensions
• Certification requirements

For international information on electrical and electronic standards, visit the International Electrotechnical Commission.

Why Choose the Orix L5 Power Supply?

The Orix L5 series provides a compact solution for constant-voltage architectural lighting.

Key advantages include:

• Slim metal housing
• 24V/12V constant-voltage output
• Compact installation footprint
• Ventilated enclosure
• Suitable for LED strips
• Compatible with linear lighting systems
• Residential applications
• Hospitality applications
• Retail and commercial use
• Professional terminal connections
• Easy integration with architectural lighting profiles