Orix YSD 24W 24V IP67 LED Driver

24W 24V LED Driver Overview

The Orix YSD 24W 24V LED Driver is a compact constant-voltage power supply designed for professional LED lighting applications. It provides a 24V DC output at up to 1A, with a maximum rated output of 24W.

Its enclosed housing and IP67 marking make it suitable for installations that require greater protection than standard open-frame power supplies. Therefore, the driver can support a wide range of architectural LED lighting systems when installed according to the project requirements.

Moreover, the slim body makes it easier to position inside ceiling voids, joinery, lighting housings, and other limited installation spaces.

Constant Voltage LED Power

This driver operates as a constant-voltage power supply. Therefore, it is intended for compatible LED products that require a stable 24V DC supply.

Typical applications may include:

• 24V LED strips
• Linear LED profiles
• Cove lighting
• Cabinet lighting
• Decorative lighting
• Architectural lighting
• Display lighting
• Signage
• Hospitality lighting
• Residential LED systems

Before installation, contractors should always confirm that the connected LED load operates at 24V DC.

Compact 24V Lighting Solution

The slim enclosed body allows designers and installers to use the driver in areas where installation space is limited.

For example, it may fit inside:

• Gypsum ceiling voids
• Aluminum lighting systems
• Joinery
• Cabinets
• Display units
• Architectural lighting details

In addition, the enclosed construction provides a cleaner and more protected format than exposed open-frame power supplies.

IP67 Protection

The product carries an IP67 marking on its housing.

This protection classification indicates a sealed design intended to provide protection against dust and water ingress under defined test conditions. However, installers should still follow the manufacturer’s installation requirements and consider cable connections, junctions, ambient temperature, and the complete electrical system.

Therefore, the IP rating of the driver alone does not automatically make the complete lighting installation IP67.

LED Strip Applications

The driver can power compatible 24V LED strips as long as the total connected load remains within the driver’s rated capacity.

For example, if an LED strip consumes 10W per meter, two meters would require approximately:

10W × 2m = 20W

This falls within the driver’s 24W maximum output.

However, lighting designers often allow operating margin rather than loading a power supply continuously at its absolute maximum. The appropriate margin should follow the LED manufacturer and project specification.

Architectural Linear Lighting

The compact format makes this driver particularly useful for linear lighting systems.

Designers can pair it with compatible 24V LED strips installed inside:

• Recessed profiles
• Surface profiles
• Cove profiles
• Cabinet profiles
• Ceiling profiles
• Decorative aluminum channels

As a result, the power supply can become part of a complete architectural lighting solution while remaining largely concealed from view.

Residential Lighting Applications

In villas and apartments, this driver can support smaller 24V lighting circuits such as decorative linear lighting, shelves, wardrobes, coves, mirrors, and joinery.

Moreover, its compact form can simplify integration into modern interiors where visible electrical equipment should remain minimal.

Hospitality and Retail Applications

The 24W 24V LED Driver can also support selected hospitality and retail lighting applications.

Typical examples include:

• Hotel joinery lighting
• Restaurant decorative lighting
• Retail shelves
• Display cabinets
• Feature walls
• Reception details
• Product displays

Because these applications often run for extended periods, designers should carefully calculate the LED load and provide appropriate ventilation around the driver where required.

Electrical Specifications

Based on the product marking shown, the key specifications include:

Type: Constant Voltage LED Driver
Output Voltage: 24V DC
Output Current: Up to 1A
Maximum Output: 24W
Protection Marking: IP67
Application: LED modules / compatible 24V LED lighting

The housing also shows certification and compliance markings including CE, CB, SELV, and RoHS.

Final input voltage, temperature limits, dimensions, and any control or dimming functionality should be confirmed from the manufacturer’s technical datasheet before project specification.

SELV Lighting Applications

The product carries a SELV marking. SELV refers to Safety Extra-Low Voltage systems designed to operate within defined low-voltage safety limits.

However, system safety depends on the complete installation. Therefore, qualified electrical professionals should follow the applicable wiring practices, local regulations, and project requirements.

Installation Considerations

Before installation, electricians should confirm:

• AC input requirements
• 24V DC output requirement
• Correct polarity
• Total LED wattage
• Cable size
• Voltage drop
• Driver location
• Ambient temperature
• Access for maintenance
• Water protection at cable connections

Furthermore, the driver should not power LED products that require a different voltage or constant-current supply.

Why Choose the Orix YSD LED Driver?

The Orix YSD driver provides a compact solution for lower-power architectural LED applications.

Key benefits include:

• 24V DC constant-voltage output
• Up to 24W output power
• Compact enclosed design
• IP67 marking
• Suitable for LED modules and strips
• Ideal for linear lighting
• Residential applications
• Hospitality and retail compatibility
• SELV marking
• CE, CB, and RoHS markings
• Easy integration into concealed lighting systems

Explore more ORIX lighting and power solutions.